UFO Quick-release licence plate base

Preparing the base: place the fixed part of the holder on the motorcycle and drill three holes at the pre-marked points on the plate. Fixing the base: attach the fixed part to the original holder with three countersunk M5 screws, washers and self-locking nuts. Tighten firmly. Safety element: insert one of the safety rubbers into the designated hole in the fixed part. Preparing the plate: attach the licence plate to the moving part of the holder with four button-head M5 screws, washers and nuts. Joining the parts: slide the moving part with the plate into the grooves of the fixed part until you hear a clear 'click' that signals correct locking. Final locking: thread the safety rubber through the holes in the moving part to prevent accidental release while riding. Removal: unhook the safety rubber, press the lever on the back of the holder and gently pull the moving part down until it is fully released. Regular check: before every ride check the holder works and all fixing points are tight.