ARIETE Grip glue

Fast-drying (30–90 seconds) glue for fixing grips to handlebars. Instructions: 1- The handlebar, inner grip surfaces and throttle tube must be clean and dry. 2- If the throttle tube is damaged, replace it. Cover all holes to stop glue running down the handlebar. 3- Apply glue to the outside of the throttle tube, the left side of the handlebar and the inner end of the grips. 4- Line the grip up in the required position and push it quickly onto the handlebar. 5- Wipe off any excess glue from the grips. 6- Before riding, check that the throttle turns freely: open the throttle fully by turning the grip towards you and then release it. The throttle must turn freely and return to its normal closed position. WARNING: harmful to eyes and mucous membranes, bonds skin within seconds. Harmful if swallowed. Flammable, keep away from heat and open flame. Contains cyanoacrylate. Fumes are harmful! Use only in well-ventilated areas. Store in a cool, dry place with the container closed when not in use. KEEP OUT OF THE REACH OF CHILDREN!